Equipment & Packaging

1. Product Description:

   This machine for packing non-free flowing powdery and flaked materials into open mouth bags.

   It is used for flour, cobaltosic oxide, polishing powder, rare earth, and starch etc.

2. Technical Parameters：
   • Weighing Range: 1-10 kg
   • Packing Rate: 2-6 bags/minute (packing speed depends on the material features and packing bags)
   • Weighing Accuracy: ±10-20g
   • Applicable Voltage: AC22OV-440V 50/60HZ Three Phases and Four Lines
   • (Clients should supply the voltage class and frequency at their local place)
   • Air Source Requirement: 0.4-0.8MPa Dry Compressed Air、Total Air Consumption: 0.3m3/min
   • Applicable Environment: Altitude≤2000meters, Humidity≤95% RH Non-congealable Dew, Operating Temperature:0℃～50℃, Storage Temperature: -20℃～70℃
3. Working Principle:

   Material is fed by horizontal screw feeder, and material will enter into weighing system uniformly through screw feeder from silo. The screw feeder starts to run after turning on packing machine and then material will be filled into bag or weighing hopper. When weight reaches the preset value, the screw feeder will stop running. Operator takes filled bag away or puts it on belt conveyor to sewing machine.

4. Specification and Model:

(Note: Packing speed and packing accuracy subject to test of materials in actual bag)

1. Applicable Range:

   This machine is for packing non-free-flowing powdered or flaked materials into open mouth bags.

   It is used for four, rare earth, bentonite, and starch etc.

2. Technical Parameters：
   • Weighing Range: 10-50 kg
   • Packing Rate: 3-16 bags/minute (packing speed depends on the material features and packing bags)
   • Weighing Accuracy: ±0.2％
   • Applicable Voltage: AC22OV-440V 50/60HZ Three Phases and Four Lines
   • (Clients should supply the voltage class and frequency at their local place)
   • Air Source Requirement: 0.4-0.8MPa Dry Compressed Air、Total Air Consumption: 0.3m3/min
   • Applicable Environment: Altitude≤2000meters, Humidity≤95% RH Non-congealable Dew, Operating Temperature:0℃～50℃, Storage Temperature : -20℃～70℃
3. Working Principle:

   Material is fed by horizontal screw feeder, and material will enter into weighing system uniformly through screw feeder from silo. The screw feeder starts to run after turning on the packing machine, and then material will be filled into bag or weighing hopper. When weight reaches the preset value, the screw feeder will stop running. Operator takes filled bag away, or puts it on belt conveyor to sewing machine.

4. Specification and Model:

1. Applicable Range:

   This machine is for packing high hardness, irregular granule, powdery and granular mixture into open mouth bags.

   It is used for metal, non-metal, refractory materials, and feed etc.

2. Technical Parameters：
   • Weighing Range: 10-50 kg
   • Packing Rate: 3-15 bags/minute (packing speed depends on the material features and packing bags)
   • Weighing Accuracy: ±0.2％
   • Applicable Voltage: AC22OV-440V 50/60HZ Three Phases and Four Lines
   • (Clients should supply the voltage class and frequency at their local place)
   • Air Source Requirement: 0.4-0.8MPa Dry Compressed Air、Total Air Consumption: 0.4m3/min
   • Applicable Environment: Altitude≤2000meters, Humidity≤80% RH Non-congealable Dew, Operating Temperature:0℃～50℃, Storage Temperature: -20℃～70℃
3. Working Principle:

   Material is fed by vibrating feeder, and product will enter into weighing system uniformly through belt feeder from silo, the feeding is controlled by controlling system. The vibrating feeder starts to run after start up packing machine, and then product will be filled into bag or weighing hopper. When weight reaches the presetting value, the vibrating feeder will stop running. The operator takes filled bag away or puts it on belt conveyor to sewing machine. The packing process finishes.

4. Specification and Model:

   Model	Weighing Range	Filling Speed	Accuracy	Power	Referenced Size (m)	Representative Material
   DCS-CWZD No Weighing Hopper	10-50kg	3-5 bags/minute	±0.2%	1.5kw	Recommend Mounting Height≥2.3	Mixture of Power and Granular with Bad Fluidity.
   DCS-CDZD Single Weighing Hopper	10-50kg	3-6 bags/minute	±0.2%	1.5kw	Recommend Mounting Height≥3.1	Mixture of Power and Granular with Bad Fluidity.
   DCS-CSZD Double Weighing Hopper	10-50kg	6-15 bags/minute	±0.2%	3kw	Recommend Mounting Height≥3.8	Mixture of Power and Granular with Bad Fluidity.

    

1. Applicable Range:
   This machine is for packing irregular granules, and non-free flowing powdery and granular mixture into open mouth bags.

   It is used for metal, non-metal, industrial chemical, refractory materials etc.

2. Technical Parameters：
   • Weighing Range: 10-50 kg
   • Packing Rate: 2-15 bags/minute (packing speed depends on the material features and packing bags)
   • Weighing Accuracy: ±0.2％
   • Applicable Voltage: AC22OV-440V 50/60HZ Three Phases and Four Lines
   • (Clients should supply the voltage class and frequency at their local place)
   • Air Source Requirement: 0.4-0.8MPa Dry Compressed Air、Total Air Consumption: 0.8m3/min
   • Applicable Environment: Altitude≤2000meters, Humidity≤95% RH Non-congealable Dew, Operating Temperature:0℃～50℃, Storage Temperature: -20℃～70℃
3. Working Principle:

   Material is fed by belt feeder, and material will enter into weighing system uniformly through belt feeder from silo. The feeding is controlled by a controlling system. The belt feeder starts to run after turning on the packing machine and then material will be filled into bag or weighing hopper. When weight reaches the preset value, the belt feeder will stop running. The operator takes filled bag away or puts it on belt conveyor to sewing machine.

4. Specification and Model:

1. Product Description:

   This machine for packing free flowing powdery, granular and blocky Materials into open mouth bags.

   It is used for rice, granulated sugar, seed, compound fertilizer, rubber granule, feed, fertilizer, and granulated PVC etc.

2. Technical Parameters:
   • Weighing Range: 1-10 kg
   • Packing Rate: 2-12bags/minute (packing speed depends on the material features and packing bags)
   • Weighing Accuracy: ±10-20g
   • Applicable Voltage: AC22OV-440V 50/60HZ Three Phases and Four Lines
   • (Clients should supply the voltage class and frequency at their local place)
   • Air Source Requirement: 0.4-0.8MPa Dry Compressed Air, Total Air Consumption: 0.5m3/min
   • Applicable Environment: Altitude≤2000meters, Humidity≤95% RH Non-congealable Dew, Operating Temperature: 0℃～50℃, Storage Temperature: -20℃～70℃
3. Working Principle:

   Materials flow freely by gravity and product will enter into weighing system uniformly through feeding unit from silo. The feeding unit valve will open after packing machine starts and then materials will be filled into bag or weighing hopper. When weight reaches the preset value, the feeding unit valve will close, and material quickly flows into bag from weighing hopper. The operator takes filled bag away or puts it on belt conveyor to sewing machine.

4. Specification and Model:

1. Applicable Range:

   This machine is for packing free flowing granular and blocky materials into open mouth bags.

   It I used for rice, seed, urea, compound fertilizer, granulated sugar, rubber granule, feed, fertilizer, granulated PVC, active carbon, construction materials, and refractory material etc.

2. Technical Parameters:
   • Weighing Range: 10-50 kg
   • Packing Rate: 4-20 bags/minute (packing speed depends on the material features and packing bags)
   • Weighing Accuracy: ±0.2％
   • Applicable Voltage: AC22OV-440V 50/60HZ Three Phases and Four Lines
   • (Clients should supply the voltage class and frequency at their local place)
   • Air Source Requirement: 0.4-0.8MPa Dry Compressed Air、Total Air Consumption: 0.5m3/min
   • Applicable Environment: Altitude≤2000meters, Humidity≤95% RH Non-congealable Dew, Operating Temperature: 0℃～50℃, Storage Temperature : -20℃～70℃

3. Working Principle:
   Materials flow freely by gravity and the product will enter into weighing system uniformly through feeding unit from silo. The feeding unit valve will open then materials will be filled into bag or weighing hopper. When weight reaches the preset value, the feeding unit valve will close. Operator takes filled bag away, or puts it on belt conveyor to sewing machine.
4. Specification and Model: